Showing posts with label Star Trek The Next Generation. Show all posts
Showing posts with label Star Trek The Next Generation. Show all posts

18 Oct 2024

The size of the Enterprise-C

The USS Enterprise (NCC-1701-C) was a 24th century Federation Ambassador-class starship operated by Starfleet. It was the fourth Federation starship to bear the name Enterprise. In 2344, Captain Rachel Garrett served as the ship's commanding officer.

Not as much effort was put into the design of the Enterprise-C as was the case for the "stars" of Star Trek such as the Enterprise-D or -E. Therefore, there is only rudimentary information about the ship's construction, such as the drawings of the outer hull. As a first step in calculating the size, I added decks to the original blueprint of the Enterprise-C. 

Enterprise-C sketch by Rick Sternbach

According to this blueprint the ship has 37 decks.

  • The premise for all my deck calculations: a deck is 2.5m + 0.5m for EPS cables, power cables, ... = 3m height for a deck. 
  • My calculations follow a purely mathematical approach. I do not compare bridge modules or disk heights with each other. I always pull in decks based on the rows of windows and then calculate a physically plausible room height.

Now I checked whether this also matches the external appearance of the Enterprise-C in terms of the windows and the shuttle bays. The number of 37 decks fits this assumption very well.


With a deck height of 3m, this results in a total length of 491.5m.
The official length of 524.25m is therefore a bit too large.
This is mainly because the producers issued the instruction that the Enterprise-C should simply have a length between the Enterprise-D and the Excelsior.

That's why Andrew Probert's initial design for the Enterprise-C was also included on the "old" size chart.

This size chart also contains the wrong size of the Excelsior class. If you just consider that the Excelsior class has 32 decks, then it already appears too small on the size chart.
 

The size of the Oberth class was also determined somewhat arbitrarily.

24 Apr 2021

Olympic Class (USS Pasteur) studio model - reference photos


Here are my color corrections of the Olympic Class studio model photos. The photos were originally taken by Bill George, who designed and built the miniature in his own time, before offering it up for use in the final episode of The Next Generation, “All Good Things”. The design pays homage to Matt Jefferies’ concept art for the Daedalus class from the 22nd century. The photos feature George’s original name for the ship, the USS Olympic, before it was renamed into USS Pasteur to better reflect its use in the episode as a medical vessel. You can also see the Starfleet emblem from TNG on the spaceship. In the final episode, it was replaced with the Starfleet medical symbol. The color corrections are minimal. The photos were a bit overdriven.

Here you get to the COLOR CORRECTED PHOTOS.

7 Dec 2020

STAR TREK Size Comparison Charts - Ships from TNG to DS9

 Here are the size chart with the ships from the Alpha, Beta and Gamma Quadrant.


PS: A special thank (and all copyright) for the picture material to: John Eaves, Drex Files, Star Trek Fact Files and Star Trek The Magazine, Starship Collection Magazine and The Light Works.

Size calculations:
__________

29 Sept 2020

Oberth Class (USS Grissom & USS Pegasus) studio model - reference photos



Here are my color corrections of the Oberth Class studio model photos. Bill George has posted these photos of the Oberth class studio model at Imgur. The corrections are essentially limited to the white balance, contrast and highlights / shadows. Some images needed color matching. While formerly being the USS Grissom from Star Trek III: The Search for Spock, the model photographed has the configuration from Star Trek TNG season 7, Episode 12 “The Pegasus”.

Here you get to the COLOR CORRECTED PHOTOS.

25 Apr 2020

Klingon K'Tinga Class - The Warp Nacelles

Unfortunately, only one Warp nacelle was designed for the kit and the other mirrored. However, there are significant differences in the design of both nacelles.

top: inside right
below: outside left

top: outside right
below: inside left

The rods are included in the kit, but I sanded them down and replaced them, otherwise the gaps would have been filled. Given the size of the model, I didn't find it adequate.

4 Apr 2020

Klingon K'Tinga Class - The Hangar Deck

The deficit of the kit became clear with the hangar deck. Based on my details, which correspond to the studio model of the K'Tinga class, you can clearly see the symmetrical design of the parts.


One side of the hangar deck was designed for the kit and the other was only mirrored. But that's not something you can't replace as a ambitious model maker.


21 Mar 2020

Klingon K'Tinga Class - The Impulse Engine

To detail the impulse engine of the K'Tinga class was not very complex. Only a few parts were missing here.



I could only find this one photo that shows what the area above the engines looks like.

K'Tinga-class Studio Model (reference photo by John Eaves)

6 Mar 2020

Klingon K'Tinga Class - The Main Body

Only small details need to be added to the front of the main body. This includes an area exactly in the lower center and the removal of the small "pyramid" on the right side.


On the top I added small details in front of the Disruptor towers. I also added small plates that are asymmetrically placed on both sides. This is a small deficit of this model kit. All parts that appear on both sides are mirror-symmetrical. Regardless of the differently worked parts of the studio model.



While studying the reference photos of the original model, I noticed that the angle of the "radiator grill" needs to be changed (white marking).



 I also added small details at the lower front corners.

21 Feb 2020

Klingon K'Tinga Class - The Antenna

The supplied antenna at the bottom of the neck to the main body was too roughly designed for me. I built them from the reference photos.


For the correct distance, the antenna sits on two small plastic pieces. The gluing points for these spacers can even be found in the photos of the studio model.



At the bottom there were cavities that I filled with model filler.

7 Feb 2020

Klingon K'Tinga Class - The Neck

After the details of the head section were finished, I took a closer look at the neck.


The small plate on the bottom can only be seen in The Motion Picture. During the later upgrade to the Qo'noS One, it probably fell off and was no longer replaced.


The narrow rods at the top of the neck section are no longer in place on the Qo'noS One. For the K'Tinga I added it with spring steel wire.


At the rear neck (to the main body) was missing a wide strip on either side. I added it with plastic.


I have also adjusted the two small detail areas to the studio model. The now white parts were previously whole blocks. Now, like the original, there is a gap so that you can see inside.

31 Jan 2020

Klingon K'Tinga Class - The Head

The K'Tinga-class battle cruiser was a primary class of warship in service with the Klingon Imperial Fleet in the late 23rd century and with the Klingon Defense Force in the mid-to-late 24th century (Qo'noS One-configuration).


The design of the Klingon K'Tinga-class, premiering in Star Trek: The Motion Picture, was based on the D7-class, created by Matt Jefferies for Star Trek: The Original Series, which was itself based on the manta ray in both shape and color.

design sketch by Matt Jefferies

I bought a while ago the Klingon K'Tinga class plastic model kit in 1/350. It's a very accurate and large kit - the whole ship is 61cm long when assembled.
Almost all surface details of the studio model are implemented on the miniature.

__________________________________________

In order to make the spaceship as accurate as possible, I have collected some reference pictures of the studio model.
K'Tinga Class Studio Model - reference photos - part 1
K'Tinga Class Studio Model - reference photos - part 2

The photos of the Qo'noS One helped me in particular to detail the head.
Qo'noS One - K'Tinga Class Studio Model - reference photos
__________________________________________


Basically, it is just a few small details that are missing from the model.


But some are so distinctive that they shouldn't be missing. 


I replaced the rod with one made of spring steel wire.


That the two plates on the underside of the head are missing is quite striking. However, on the K'Tinga class they have the same color as the hull. Therefore, the makers probably didn't notice it. On the Qo'noS One they have a different color.



Unfortunately, the details on the corrugated strip from the bulb to the head were also missing. However, this is difficult to see on the reference photos. The pictures of the Qo'noS One helped me a lot.


10 Jan 2020

The size of the Vulcan ship T'Pau - Apollo class transport

The T'Pau (NSP-17938) was a Vulcan Mahl'kom group Apollo-class transport that was in service with the Vulcan National Merchant Fleet in the mid-24th century. T'Pau was named in honor of the Vulcan matriarch T'Pau.
  • The premise for all my deck calculations: a deck is 2.5m + 0.5m for EPS cables, power cables, ... = 3m height for a deck. 
  • My calculations follow a purely mathematical approach. I do not compare bridge modules or disk heights with each other. I always pull in decks based on the rows of windows and then calculate a physically plausible room height.
schematic by Eaglemoss collection (external form corrected by FLEETYARD)

The ship has 8 decks.
After calculating the decks, this results in a length of 184m.

auction photo by julienslive.com
The scheme in Eaglemoss magazine is not entirely correct. So I modified it. With the help of the auction photos of the Tosk ship (later modification of the T'Pau for Deep Space Nine) and the original profile drawing, I was able to reconstruct this type of ship.

The entire deflector area under the ship was missing. I also added the lower holder of the ring and the golden area at the lower front of the ship.


schematic by Rick Sternbach (Profiles in History Hollywood Auction #14)

The ship was later destroyed by a Romulan warbird to prevent the crew of the USS Enterprise-D from taking custody of it and the Romulan troops aboard (TNG: "Unification II").
In this fly-by scene with a Romulan warbird you also get a good impression of how small the ship is.

screencapture by trekcore.com (TNG: "Unification" Part II)

19 Apr 2019

Klingon Vor'cHa class - Decals

Decals are also supplied with the 3D printed parts I bought to build the Vor'cHa class. Here you can choose between the TNG version and the DS9 version. Because I already decided to paint the DS9 version, I also chose the decals for it.


You can still choose between "new" and "used" versions. I love the used effect. The Klingon emblem looks scratched, which fits very well with the unkempt condition of Klingon spaceships.


The decals for the Radiator Block in darker grey.


The Warp nacelle decals.


The tiny Klingon letters are printed very fine.


The scratched red markings on the Phasers at the back of the ship.


The scratched Klingon emblem on the bottom.


All in all, the decals are very easy to work with. They are thin and therefore fit well with the model. The colors are realistic.

11 Mar 2019

Klingon Vor'cHa Class - Coloration

The hull color of the Klingon Vor'cHa class has a mix of 40% Gunship Green (71014) and 60% Pale Blue (71008).
The radiator blocks are brushed in Barley Grey (71051).


I chose the color variation from Star Trek Deep Space Nine.

screenshot by trekcore.com (DS9: "The Way Of The Warrior - II")




 For the sand colored plates I used a mix of:

  • Tan Yellow (70912) 60%
  • Ger. Fieldgrey WWII (70830) 30% 
  • Glaze Medium (70596) 10%.

For the Phaser stripes and Phaser blocks on the back I used the same mix and add a little bit Deep Yellow (70915).
The slightly lighter green areas are painted with a mix of 
  • Pale Sand (70937) 20% 
  • Ger. Fieldgrey WWII (70830) 60%
  • Glaze Medium (70596) 10%.

The small bright areas are painted with 
  • Pale Sand (70937) 60% 
  • Ger. Fieldgrey WWII (70830) 40%

 All the small red markings are painted with Red Leather (70818).


For the metallic details in the middle on the Warp nacelles I used Copper (77710).
I painted the three stripes in the back area with Gunmetal (70863).


The dark red colored plates have a mix of:

  • Red Tail Light Ger. (Panzer Aces 307) 30%
  • Ger. Fieldgrey WWII (70830) 60%
  • Glaze Medium (70596) 10%

The details arround the Deflector is German C. Pale Brown (70825).


All windows are painted in White (71001).


The weathering around all panels is a mix of:

  • Track Primer (Panzer Aces 304) 70%
  • Glaze Medium (70596) 30%